- Build & setup instruction video
- question about panting
- Common mistakes
- Tail rotor pitch
- Connections on motor and ESC
- Where to put lipo's
- How do I balance the tail rotor blades?
- Motor & ESC installation
- Extra connections??
- Assembly started
- Stiff ball joints
- How tight should the blades be?
- Pitch Gauge
- Mega Motor
- Main gear aluminum shaft collar question
- Pitch servo
- boom bracket for tail servo linkage
- Loctite
- Mad Wfe
- Main gear ?
- Main shaft collar?
- what next?
- Main blades seem stiff
- Why they ship with two sets of blades
- Canopy Windshield
- Has my align gyro had it.
- Heliup Flybar arms
- Gyro inside frame?
- New Dual Damper Main Rotor Housing Set Hassle
- A different twist on fixing the head
- Tail servo
- Head build Big Screw Up
- T-rex head out of true
- 450XL CCPM build pics
- Rudder servo location/slider setup & Rx channel
- Missing Main Rotor Holder
- First building question- the blade axle
- Question on 450XL(hde) blade grip build?
- How to remove one-way bearing
- Drive belt coming apart.
- One way ball links?
- Elevator arm position doesn't seem right
- T-REX450XLccpm is complete
- neu 1105 pinion question
- 450X V2 flybar rod?
- Do I need to glue main rotor bearings to frame?
- blade bolts tightening
- R48 loctite Issue..
- CCPM setup for Heliup carbon frame
- Battery bracket??? 450 XL
- Trex Tail drive gear assembly is very tight
- Hairdryer on Head?
- Build time
- main rotor holders
- better location for esc and electron 6..?
- Ball Reemer
- 450xl main rotor holder bearings?
- Lubrication in 450-XL build
- How to free up linkages?
- Astro motor
- Huh? Canopy position w/battery??
- Feathering shaft woes......
- Canopy Vents and Battery Inquiry
- Question on servo arms for 450XL
- HELP: Fitting the canopy
- Rotor head linkage setup
- Tail Rotor troubles lets hear them
- Arms on flybar seesaw holder ( part ref HS 1004-1)
- 450xl frame building question.
- What do I need to buy prior to receiving the TREX
- T-Rex 450XL assembly instructions on PDF?
- Working CDE (eCCPM) servo solutions.
- Elevator control arm assembly questions?
- Reversing tail blade grips
- HELP, TRex Tail Rotor Problem
- Main rotor blades
- Changing main gear
- Calming the T-Rex
- loctite r48 fix time information
- servo choice?
- Loose screws mod
- Transmitter settings.
- eCCPM N4000-11
- Is there a market for custom paint jobs. BLING
- Canopy nuts are gone
- mast?
- Frame fitting
- Newbie question - Using HS56 on the CDE T-rex 450XL
- Carbon Fiber Frame not fitting well with Main drive gear &am
- Align CF Frame - leftovers
- Is the R48 supplied with the T-rex the right stuff to use???
- Battery connector??
- tail control rod mounting
- This part in the manul dosent make sense to me..............
- Pinion and Main Gear, MESH????
- Where can I buy HB5008 CCPM T-Type levers ?
- TREX XL Metal Head Pitch Problem!
- anti rotation bracket
- Frame Bearings
- servo arm & ball location
- Stiff ball links
- align 430L pinning/repair
- Secure Balls?
- D'oh!!!!
- two questions
- New Hitec HS65HB servo
- sometimes it easy not to like the trexbuilding
- Do I need to CA these Rods?
- Tail rotor play
- Stiff blade pitch movement TRex
- Requesting Photos!
- servo wires
- Building this CraPlastic thing to the nth-degree...
- T-REX Super Frame V2 will it accept Align Swash plate
- the rod's too big for the holes in the control set....
- How do you mount your HS-56B servos?
- Micro Servo Arms and link Ball Attachment?
- Servo recommendation for IC T-Rex
- Tail Servo Close to Tail?
- Mounting a S9650 on the tail?
- bearing part numbers
- Tail pulley bearings are gummy
- blade grip
- new 450 XL canopy
- My t-rex Help plz
- Tamiya liquid threadlock Vs. loctite 222
- HS-56 Servos / how to mount?
- HDS-577 fitting
- cnc fly bar screws
- Microheli QNC head quick question
- Also...should I reassemble with threadlock?
- Another Microheli question...FLYBAR CONTROL SYSTEM :D
- What motor is best for Trex with 3s Lipo
- Threadlock
- Aligning the belt on the pulley!
- My Walkera Dragonfly #39 is better than a stock T-Rex
- How Do I Remove Bearings
- 450XL HDE - Collective Rocker Assembly
- T-Rex 450XL HDE Tail Boom
- 0.9mm Hex
- Trex Superframe V2 servos linkage setup problem
- NEW HeliDirect HD450HDX heli
- Tail Rod Guide
- New T-rexer
- aerial routing
- The right gear
- X400 to TRex Conversion
- Which pinion for trex 450xl CDE
- Flybar does not go smooth!
- Main Gear <> One Way Bearing
- 450xl CDE manual warnings
- Transferring decals to T-Rex canopy
- T-Rex Screws
- How do i remove the main rotor holder?
- dx6 spektrum servos and trex 450 xl cde
- Ball Links
- Pitch gauges/Paddle gauges ???
- Gyro Mounting
- trex 450se XL new build
- New build help
- TREX 450x instruction question?
- T-Rex impossible for beginners?
- Problems with Large Main Gear
- Motor pinion help
- Is this a common problem on the CDE?
- Replacing the motor?
- HDE to CCPM conversion
- Stripped Threads in flybar cage?
- Setting pinion mesh
- Trex belt lube
- HS-56HB
- TrexSE CF Frame Material Supplier?
- reciever aerial too long?
- flybar cradle play?
- New kit, bad one-way bearing (how to replace)
- Servo arms for upper servos?
- Motor Faulty?
- A little crack
- Wiring on T-Trex 450XL CDE
- Servo horns on T-Rex 450XL CDE
- Can I mount the gyro like this.
- Ventilation inside the canopy
- building a little beast
- Why can't I turn the boom tail "box"
- Mounting a S9650 on a 450se?
- Weight guide on manual
- Dx7 and phionex flight sim help!?!?!?
- Where Do You Mount Your Electronics
- Advice on Batteries
- T-REX450 s Rotor head/ linkage problem ???
- tight blades on 450SE v2
- Head slop
- T-rex Xl Ccpm Upgrade Canopy Problem
- Rotor Hub and Flybar Hub play
- T-rex Gyro position / rudder servo position
- loose blade grips?
- Build/Buying advise
- new to hobby, asking for help
- 3D Throttle / Pitch Curves Settings Recommendations
- HDE carbon main frame question
- Some questions about the tail boom on a 450SE
- Just purchased a used TRex 450X and new to helis.
- T Rex XL balance
- Tail assembly
- Servo wire routing
- ARGH!! Grub screws
- More tail issues
- 450 tail collar
- Happy camper, main gear ?
- Servo arms and ball links
- XL Build and set up.
- Tail boom supports
- JR ES375 Servos
- Connectors
- Just got my 450SE V2! Don't know where to begin!
- Wiring
- Stop Start